Micromax X253
Micromax X253 is a Micromax firmware file listed under Micromax, distributed as Micromax_X253_MT6260_EH_V0.1.1_MIRA.zip with a download size of 2.6 MB. It is built for the MediaTek MT6260 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax X253
Looking for the official stock firmware for your Micromax X253? You're in the right place. Below is the original Micromax flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Micromax X253 a fresh start without the clutter that builds up over time. File Name: Micromax_X253_MT6260_EH_V0.1.1_MIRA.zip File Size: 2.6 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Micromax X253 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Micromax X253 |
|---|---|
| Package | Micromax_X253_MT6260_EH_V0.1.1_MIRA.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6260 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.6 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax X253 with SP Flash Tool
- Confirm Micromax X253 matches your exact device model and that the phone uses the MT6260 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.6 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Micromax X253 free to download?
Yes, Micromax X253 can be downloaded free of charge from this page.
How large is the download?
The Micromax X253 package is 2.6 MB.
Which tool do I need to flash Micromax X253?
Micromax X253 is MediaTek MT6260 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.