Micromax N8301
Micromax N8301 is a Micromax firmware file listed under Micromax, distributed as Micromax_N8301_MT6765_SW_V07_HW_V3.0_20181229.zip with a download size of 1.58 GB. It is built for the MediaTek MT6765 chipset, with a firmware build date of December 29, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax N8301
If your Micromax N8301 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Micromax flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax N8301 to factory condition. File Name: Micromax_N8301_MT6765_SW_V07_HW_V3.0_20181229.zip File Size: 1.58 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Micromax N8301 should run like a brand new unit.
File Details
| File name | Micromax N8301 |
|---|---|
| Package | Micromax_N8301_MT6765_SW_V07_HW_V3.0_20181229.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6765 |
| Build date | December 29, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.58 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax N8301 with SP Flash Tool
- Confirm Micromax N8301 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.58 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Micromax N8301 free to download?
Yes, Micromax N8301 can be downloaded free of charge from this page.
How large is the download?
The Micromax N8301 package is 1.58 GB.
Which tool do I need to flash Micromax N8301?
Micromax N8301 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.