Micromax IN Note 1 E7746
Micromax IN Note 1 E7746 is a Micromax firmware file listed under Micromax, distributed as Micromax_IN_Note_1_E7746_MT6768_SW_V12.0_HW_V2.0_070121.zip with a download size of 1.7 GB. It is built for the MediaTek MT6768 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax IN Note 1 E7746
If your Micromax IN Note 1 E7746 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Micromax flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax IN Note 1 E7746 to factory condition. File Name: Micromax_IN_Note_1_E7746_MT6768_SW_V12.0_HW_V2.0_070121.zip File Size: 1.7 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Micromax IN Note 1 E7746 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Micromax IN Note 1 E7746 |
|---|---|
| Package | Micromax_IN_Note_1_E7746_MT6768_SW_V12.0_HW_V2.0_070121.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6768 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.7 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax IN Note 1 E7746 with SP Flash Tool
- Confirm Micromax IN Note 1 E7746 matches your exact device model and that the phone uses the MT6768 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.7 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Micromax IN Note 1 E7746 free to download?
Yes, Micromax IN Note 1 E7746 can be downloaded free of charge from this page.
How large is the download?
The Micromax IN Note 1 E7746 package is 1.7 GB.
Which tool do I need to flash Micromax IN Note 1 E7746?
Micromax IN Note 1 E7746 is MediaTek MT6768 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.