Micromax GC313
Micromax GC313 is a Micromax firmware file listed under Micromax, distributed as Micromax_GC313_MT6260_170423_MIRA.zip with a download size of 6 MB. It is built for the MediaTek MT6260 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax GC313
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Micromax GC313 owners, this page hosts the original Micromax stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Micromax_GC313_MT6260_170423_MIRA.zip File Size: 6 MB Back up your files, charge the Micromax GC313 past 50 percent, install the matching drivers, and only then begin. Once installed, your Micromax GC313 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Micromax GC313 |
|---|---|
| Package | Micromax_GC313_MT6260_170423_MIRA.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6260 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 6 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax GC313 with SP Flash Tool
- Confirm Micromax GC313 matches your exact device model and that the phone uses the MT6260 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (6 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Micromax GC313 free to download?
Yes, Micromax GC313 can be downloaded free of charge from this page.
How large is the download?
The Micromax GC313 package is 6 MB.
Which tool do I need to flash Micromax GC313?
Micromax GC313 is MediaTek MT6260 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.