Lenovo Tab E8 TB-8304F1
Lenovo Tab E8 TB-8304F1 is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_E8_TB-8304F_MT8163_USR_S000030_190227_MP102V2.10.1_16G_ROW_FL.zip with a download size of 2 GB. It is built for the MediaTek MT8163 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab E8 TB-8304F1
Looking for the official stock firmware for your Lenovo Tab E8 TB-8304F1? You're in the right place. Below is the original Lenovo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lenovo_Tab_E8_TB-8304F_MT8163_USR_S000030_190227_MP102V2.10.1_16G_ROW_FL.zip File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lenovo Tab E8 TB-8304F1 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Lenovo Tab E8 TB-8304F1 |
|---|---|
| Package | Lenovo_Tab_E8_TB-8304F_MT8163_USR_S000030_190227_MP102V2.10.1_16G_ROW_FL.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT8163 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab E8 TB-8304F1 with SP Flash Tool
- Confirm Lenovo Tab E8 TB-8304F1 matches your exact device model and that the phone uses the MT8163 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo Tab E8 TB-8304F1 free to download?
Yes, Lenovo Tab E8 TB-8304F1 can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab E8 TB-8304F1 package is 2 GB.
Which tool do I need to flash Lenovo Tab E8 TB-8304F1?
Lenovo Tab E8 TB-8304F1 is MediaTek MT8163 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.