Lenovo Tab 3 7 TB3-730X
Lenovo Tab 3 7 TB3-730X is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_3_7_TB3-730X_MT6735M_HW73_S042_180910.zip with a download size of 1 GB. It is built for the MediaTek MT6735M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab 3 7 TB3-730X
Looking for the official stock firmware for your Lenovo Tab 3 7 TB3-730X? You're in the right place. Below is the original Lenovo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lenovo_Tab_3_7_TB3-730X_MT6735M_HW73_S042_180910.zip File Size: 1 GB Back up your files, charge the Lenovo Tab 3 7 TB3-730X past 50 percent, install the matching drivers, and only then begin. Once installed, your Lenovo Tab 3 7 TB3-730X should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Lenovo Tab 3 7 TB3-730X |
|---|---|
| Package | Lenovo_Tab_3_7_TB3-730X_MT6735M_HW73_S042_180910.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6735M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab 3 7 TB3-730X with SP Flash Tool
- Confirm Lenovo Tab 3 7 TB3-730X matches your exact device model and that the phone uses the MT6735M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo Tab 3 7 TB3-730X free to download?
Yes, Lenovo Tab 3 7 TB3-730X can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab 3 7 TB3-730X package is 1 GB.
Which tool do I need to flash Lenovo Tab 3 7 TB3-730X?
Lenovo Tab 3 7 TB3-730X is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.