Lenovo SQ188 Clone
Lenovo SQ188 Clone is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_SQ188_Clone_MT6572_06042016.zip with a download size of 217 MB. It is built for the MediaTek MT6572 chipset, with a firmware build date of April 06, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo SQ188 Clone
The Lenovo SQ188 Clone runs on Lenovo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lenovo_SQ188_Clone_MT6572_06042016.zip File Size: 217 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Lenovo SQ188 Clone should run like a brand new unit.
File Details
| File name | Lenovo SQ188 Clone |
|---|---|
| Package | Lenovo_SQ188_Clone_MT6572_06042016.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6572 |
| Build date | April 06, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 217 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo SQ188 Clone with SP Flash Tool
- Confirm Lenovo SQ188 Clone matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (217 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lenovo SQ188 Clone free to download?
Yes, Lenovo SQ188 Clone can be downloaded free of charge from this page.
How large is the download?
The Lenovo SQ188 Clone package is 217 MB.
Which tool do I need to flash Lenovo SQ188 Clone?
Lenovo SQ188 Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.