Lenovo K2 Note
Lenovo K2 Note is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_K2_Note_MSM8937_S143_1609261820_Q00380_ROW_6.0.1_QPST.zip with a download size of 1.36 GB. It is built for the Qualcomm MSM8937 chipset and runs Android 6.0 (Marshmallow). It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo K2 Note
Looking for the official stock firmware for your Lenovo K2 Note? You're in the right place. Below is the original Lenovo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lenovo K2 Note a fresh start without the clutter that builds up over time. File Name: Lenovo_K2_Note_MSM8937_S143_1609261820_Q00380_ROW_6.0.1_QPST.zip File Size: 1.36 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Lenovo K2 Note should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Lenovo K2 Note |
|---|---|
| Package | Lenovo_K2_Note_MSM8937_S143_1609261820_Q00380_ROW_6.0.1_QPST.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | Qualcomm MSM8937 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1.36 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo K2 Note with QFIL
- Confirm Lenovo K2 Note matches your exact device model and that the phone uses the MSM8937 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.36 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Lenovo K2 Note free to download?
Yes, Lenovo K2 Note can be downloaded free of charge from this page.
How large is the download?
The Lenovo K2 Note package is 1.36 GB.
Which tool do I need to flash Lenovo K2 Note?
Lenovo K2 Note is Qualcomm MSM8937 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Lenovo K2 Note?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.