ZTE E7L
ZTE E7L is a ZTE firmware file listed under ZTE, distributed as ZTE_E7L_MT6580_20160301_5.1.zip with a download size of 671 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of March 01, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 33 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE E7L
If your ZTE E7L has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full ZTE flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the ZTE E7L back to square one. File Name: ZTE_E7L_MT6580_20160301_5.1.zip File Size: 671 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the ZTE E7L should run like a brand new unit.
File Details
| File name | ZTE E7L |
|---|---|
| Package | ZTE_E7L_MT6580_20160301_5.1.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | March 01, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 671 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE E7L with SP Flash Tool
- Confirm ZTE E7L matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (671 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is ZTE E7L free to download?
Yes, ZTE E7L can be downloaded free of charge from this page.
How large is the download?
The ZTE E7L package is 671 MB.
Which tool do I need to flash ZTE E7L?
ZTE E7L is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is ZTE E7L?
This firmware is Android 5.1 (Lollipop), built on March 01, 2016.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.