Xiaomi

Xiaomi Redmi Y2

Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip
June 16, 2026 Xiaomi 2 GB Xiaomi

Xiaomi Redmi Y2 is a Xiaomi firmware file listed under Xiaomi, distributed as Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip with a download size of 2 GB. It is built for Qualcomm-based devices and runs Android 8.1 (Oreo), with a firmware build date of August 29, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 45 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Xiaomi Redmi Y2

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Xiaomi Redmi Y2 owners, this page hosts the original Xiaomi stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip File Size: 2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Xiaomi Redmi Y2 should run like a brand new unit.

File Details

File nameXiaomi Redmi Y2
PackageXiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip
Brand / PlatformXiaomi
CategoryXiaomi
PlatformQualcomm
Android versionAndroid 8.1 (Oreo)
Build dateAugust 29, 2018
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Xiaomi Redmi Y2 with QFIL

  1. Confirm Xiaomi Redmi Y2 matches your exact device model and that it is intended for Xiaomi hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Xiaomi Redmi Y2 free to download?

Yes, Xiaomi Redmi Y2 can be downloaded free of charge from this page.

How large is the download?

The Xiaomi Redmi Y2 package is 2 GB.

Which tool do I need to flash Xiaomi Redmi Y2?

Xiaomi Redmi Y2 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

What Android version is Xiaomi Redmi Y2?

This firmware is Android 8.1 (Oreo), built on August 29, 2018.

Which devices is this firmware for?

This file is intended for Xiaomi devices. Always confirm it matches your specific model before flashing.

More Xiaomi files

Back to Xiaomi