# Xiaomi Redmi Y2

> Xiaomi Redmi Y2 is a Xiaomi firmware file listed under Xiaomi, distributed as Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip with a download size of 2 GB. It is built for Qualcomm-based devices and runs Android 8.1, with a firmware build date of August 29, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/xiaomi-redmi-y2-119723>

## File details

- **File name:** Xiaomi Redmi Y2
- **Package:** Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip
- **Brand / platform:** Xiaomi
- **Category:** [Xiaomi](https://www.filefirmware.com/category/xiaomi)
- **Platform:** Qualcomm
- **Android version:** Android 8.1 (Oreo)
- **Build date:** August 29, 2018
- **Flash tool:** QFIL (part of Qualcomm QPST)
- **Package format:** ZIP archive
- **File size:** 2 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/xiaomi-redmi-y2-119723>

## About Xiaomi Redmi Y2

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Xiaomi Redmi Y2 owners, this page hosts the original Xiaomi stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Xiaomi_Redmi_Y2_Miui_10_V10.0.1.0.OEFMIFH_20180829.0000.00_Global_8.1_QFIL.zip File Size: 2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Xiaomi Redmi Y2 should run like a brand new unit.

## How to flash Xiaomi Redmi Y2 with QFIL

1. Confirm Xiaomi Redmi Y2 matches your exact device model and that it is intended for Xiaomi hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2 GB) from the web page and extract it on a Windows PC.
4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

## Guides for this firmware

- [How to Get Qualcomm Phones into EDL Mode for QFIL](https://www.filefirmware.com/blog/how-to-get-qualcomm-phones-into-edl-mode-for-qfil): To get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- [How to Fix QFIL Sahara Fail Error](https://www.filefirmware.com/blog/how-to-fix-qfil-sahara-fail-error): The Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- [How to Use QFIL: Qualcomm Firmware Flashing Guide](https://www.filefirmware.com/blog/how-to-use-qfil-qualcomm-firmware-flashing-guide): QFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…

## Frequently asked questions

### Is Xiaomi Redmi Y2 free to download?

Yes, Xiaomi Redmi Y2 can be downloaded free of charge from its web page.

### How large is the download?

The Xiaomi Redmi Y2 package is 2 GB.

### Which tool do I need to flash Xiaomi Redmi Y2?

Xiaomi Redmi Y2 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

### What Android version is Xiaomi Redmi Y2?

This firmware is Android 8.1 (Oreo), built on August 29, 2018.

### Which devices is this firmware for?

This file is intended for Xiaomi devices. Always confirm it matches your specific model before flashing.

## More Xiaomi files

- [Xiaomi Redmi Note Prime](https://www.filefirmware.com/file/xiaomi-redmi-note-prime-119724) — 1 GB
- [Xiaomi Redmi Note 9](https://www.filefirmware.com/file/xiaomi-redmi-note-9-119721) — 6 GB
- [Xiaomi Redmi Note 9S](https://www.filefirmware.com/file/xiaomi-redmi-note-9s-119718) — 4 GB
- [Xiaomi Redmi Note 9 Pro](https://www.filefirmware.com/file/xiaomi-redmi-note-9-pro-119717) — 3 GB
- [Xiaomi Redmi Note 8](https://www.filefirmware.com/file/xiaomi-redmi-note-8-119716) — 3.9 GB
- [Xiaomi Redmi Note 9 4G](https://www.filefirmware.com/file/xiaomi-redmi-note-9-4g-119715) — 3.3 GB
- [Xiaomi Redmi Note 8A](https://www.filefirmware.com/file/xiaomi-redmi-note-8a-119713) — 3 GB
- [Xiaomi Redmi Note 9T](https://www.filefirmware.com/file/xiaomi-redmi-note-9t-119712) — 4 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/xiaomi-redmi-y2-119723>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
