XGody X800
XGody X800 is a XGody firmware file listed under XGody, distributed as XGody_X800_MT6580_20160120_5.1.zip with a download size of 442 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of January 20, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About XGody X800
Sometimes a clean firmware install is the best fix for a misbehaving phone. For XGody X800 owners, this page hosts the original XGody stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the XGody X800 back to square one. File Name: XGody_X800_MT6580_20160120_5.1.zip File Size: 442 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the XGody X800 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | XGody X800 |
|---|---|
| Package | XGody_X800_MT6580_20160120_5.1.zip |
| Brand / Platform | XGody |
| Category | XGody |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | January 20, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 442 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash XGody X800 with SP Flash Tool
- Confirm XGody X800 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (442 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is XGody X800 free to download?
Yes, XGody X800 can be downloaded free of charge from this page.
How large is the download?
The XGody X800 package is 442 MB.
Which tool do I need to flash XGody X800?
XGody X800 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is XGody X800?
This firmware is Android 5.1 (Lollipop), built on January 20, 2016.
Which devices is this firmware for?
This file is intended for XGody devices. Always confirm it matches your specific model before flashing.