Winmax

Winmax S405

Winmax_S405_SC6531E_V14_20180524_FSPD.zip
April 28, 2026 Winmax 3.54 MB Winmax

Winmax S405 is a Winmax firmware file listed under Winmax, distributed as Winmax_S405_SC6531E_V14_20180524_FSPD.zip with a download size of 3.54 MB. It is built for the Unisoc (Spreadtrum) SC6531E chipset, with a firmware build date of May 24, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 29 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
3.54 MB
Download Free

About Winmax S405

Winmax S405 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Winmax_S405_SC6531E_V14_20180524_FSPD.zip File Size: 3.54 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Get Link

File Details

File nameWinmax S405
PackageWinmax_S405_SC6531E_V14_20180524_FSPD.zip
Brand / PlatformWinmax
CategoryWinmax
ChipsetUnisoc (Spreadtrum) SC6531E
Build dateMay 24, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size3.54 MB
Date addedApril 28, 2026
PriceFree

How to flash Winmax S405 with SPD ResearchDownload

  1. Confirm Winmax S405 matches your exact device model and that the phone uses the SC6531E chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (3.54 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Winmax S405 free to download?

Yes, Winmax S405 can be downloaded free of charge from this page.

How large is the download?

The Winmax S405 package is 3.54 MB.

Which tool do I need to flash Winmax S405?

Winmax S405 is Unisoc (Spreadtrum) SC6531E firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Winmax devices. Always confirm it matches your specific model before flashing.

More Winmax files

Back to Winmax