Winmax Dolphin V2
Winmax Dolphin V2 is a Winmax firmware file listed under Winmax, distributed as Winmax_Dolphin_v2_MT6572_5.1.zip with a download size of 756 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 29 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Winmax Dolphin V2
Looking for the official stock firmware for your Winmax Dolphin V2? You're in the right place. Below is the original Winmax flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Winmax_Dolphin_v2_MT6572_5.1.zip File Size: 756 MB Back up your files, charge the Winmax Dolphin V2 past 50 percent, install the matching drivers, and only then begin. Once installed, your Winmax Dolphin V2 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Winmax Dolphin V2 |
|---|---|
| Package | Winmax_Dolphin_v2_MT6572_5.1.zip |
| Brand / Platform | Winmax |
| Category | Winmax |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 756 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Winmax Dolphin V2 with SP Flash Tool
- Confirm Winmax Dolphin V2 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (756 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Winmax Dolphin V2 free to download?
Yes, Winmax Dolphin V2 can be downloaded free of charge from this page.
How large is the download?
The Winmax Dolphin V2 package is 756 MB.
Which tool do I need to flash Winmax Dolphin V2?
Winmax Dolphin V2 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Winmax Dolphin V2?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Winmax devices. Always confirm it matches your specific model before flashing.