Swipe X703
Swipe X703 is a Swipe firmware file listed under Swipe, distributed as Swipe_X703_MT6580_20160429_5.1.zip with a download size of 736 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of April 29, 2016. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe X703
Swipe X703 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Swipe_X703_MT6580_20160429_5.1.zip File Size: 736 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Swipe X703 |
|---|---|
| Package | Swipe_X703_MT6580_20160429_5.1.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | April 29, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 736 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Swipe X703 with SP Flash Tool
- Confirm Swipe X703 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (736 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Swipe X703 free to download?
Yes, Swipe X703 can be downloaded free of charge from this page.
How large is the download?
The Swipe X703 package is 736 MB.
Which tool do I need to flash Swipe X703?
Swipe X703 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Swipe X703?
This firmware is Android 5.1 (Lollipop), built on April 29, 2016.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.