Swipe Konnect Star Stock Firmware
Swipe Konnect Star Stock Firmware is a Swipe firmware file listed under Swipe, distributed as Swipe_Konnect_Star_DX03_MT6580_20160922.zip with a download size of 798 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of September 22, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Konnect Star Stock Firmware
Here you will find all the latest Swipe firmware for Swipe Konnect Star. If you are looking for Swipe Konnect Star stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Swipe Konnect Star, if it is not, then flashing the below stock firmware can brick your device. The Swipe Konnect Star firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Swipe Konnect Star Firmware File Name : Swipe_Konnect_Star_DX03_MT6580_20160922.zip File Size : 798 MB Android OS Version : 6.0 Get Firmware File Name : Swipe_Konnect_Star_Indus_MT6735M_v7.0_27022017.zip File Size : 1 GB Android OS Version : 6.0 Get Firmware File Name : Swipe_Konnect_Star_MT6580_20160922_6.0.zip File Size : 725 MB Android OS Version : 6.0 Get Firmware File Name : Swipe_Konnect_Star_MT6735_01182017_6.0.zip File Size : 2 GB Android OS Version : 6.0 Get Firmware Also: Swipe Elite Plus Stock Firmware How To Flash Swipe Konnect Star Stock Firmware Download and extract the Swipe Konnect Star firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Swipe Konnect Star firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Swipe Konnect Star device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Swipe Konnect Star device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Swipe Konnect Star Stock Firmware |
|---|---|
| Package | Swipe_Konnect_Star_DX03_MT6580_20160922.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | MediaTek MT6580 |
| Build date | September 22, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 798 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Swipe Konnect Star Stock Firmware with SP Flash Tool
- Confirm Swipe Konnect Star Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (798 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Swipe Konnect Star Stock Firmware free to download?
Yes, Swipe Konnect Star Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Swipe Konnect Star Stock Firmware package is 798 MB.
Which tool do I need to flash Swipe Konnect Star Stock Firmware?
Swipe Konnect Star Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.