Swipe Elite VR Stock Firmware
Swipe Elite VR Stock Firmware is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_VR_MT6737M_23022018_7.0.zip with a download size of 1 GB. It is built for the MediaTek MT6737M chipset and runs Android 7.0 (Nougat), with a firmware build date of February 23, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite VR Stock Firmware
Here you will find all the latest Swipe firmware for Swipe Elite VR. If you are looking for Swipe Elite VR stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Swipe Elite VR, if it is not, then flashing the below stock firmware can brick your device. The Swipe Elite VR firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Swipe Elite VR Firmware File Name : Swipe_Elite_VR_MT6737M_23022018_7.0.zip File Size : 1 GB Android OS Version : 7.0 Get Firmware File Name : Swipe_Elite_VR_MT6737M_V23.0_25072017.zip File Size : 1 GB Get Firmware Also: Swipe Konnect Prime Stock Firmware How To Flash Swipe Elite VR Stock Firmware Download and extract the Swipe Elite VR firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Swipe Elite VR firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Swipe Elite VR device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Swipe Elite VR device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Swipe Elite VR Stock Firmware |
|---|---|
| Package | Swipe_Elite_VR_MT6737M_23022018_7.0.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | MediaTek MT6737M |
| Android version | Android 7.0 (Nougat) |
| Build date | February 23, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Swipe Elite VR Stock Firmware with SP Flash Tool
- Confirm Swipe Elite VR Stock Firmware matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Swipe Elite VR Stock Firmware free to download?
Yes, Swipe Elite VR Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite VR Stock Firmware package is 1 GB.
Which tool do I need to flash Swipe Elite VR Stock Firmware?
Swipe Elite VR Stock Firmware is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Swipe Elite VR Stock Firmware?
This firmware is Android 7.0 (Nougat), built on February 23, 2018.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.