Swipe Elite VR
Swipe Elite VR is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_VR_MT6737M_23022018_7.0.zip with a download size of 1 GB. It is built for the MediaTek MT6737M chipset and runs Android 7.0 (Nougat), with a firmware build date of February 23, 2018. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite VR
Swipe Elite VR Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Swipe_Elite_VR_MT6737M_23022018_7.0.zip File Size: 1 GB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Swipe Elite VR |
|---|---|
| Package | Swipe_Elite_VR_MT6737M_23022018_7.0.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | MediaTek MT6737M |
| Android version | Android 7.0 (Nougat) |
| Build date | February 23, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Swipe Elite VR with SP Flash Tool
- Confirm Swipe Elite VR matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Swipe Elite VR free to download?
Yes, Swipe Elite VR can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite VR package is 1 GB.
Which tool do I need to flash Swipe Elite VR?
Swipe Elite VR is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Swipe Elite VR?
This firmware is Android 7.0 (Nougat), built on February 23, 2018.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.