QMobile S3
QMobile S3 is a Qmobile firmware file listed under Qmobile, distributed as QMobile_S3_MT6580_ALPS.L1.MP6.V2_RGK6580.WE.L_P2_5.1.zip with a download size of 885 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About QMobile S3
QMobile S3 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: QMobile_S3_MT6580_ALPS.L1.MP6.V2_RGK6580.WE.L_P2_5.1.zip File Size: 885 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | QMobile S3 |
|---|---|
| Package | QMobile_S3_MT6580_ALPS.L1.MP6.V2_RGK6580.WE.L_P2_5.1.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 885 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash QMobile S3 with SP Flash Tool
- Confirm QMobile S3 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (885 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is QMobile S3 free to download?
Yes, QMobile S3 can be downloaded free of charge from this page.
How large is the download?
The QMobile S3 package is 885 MB.
Which tool do I need to flash QMobile S3?
QMobile S3 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is QMobile S3?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.