Qmobile Infinity Dual
Qmobile Infinity Dual is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_Infinity_Dual_MT6580_050117_6.0.zip with a download size of 855 MB. It is built for the MediaTek MT6580 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile Infinity Dual
If your Qmobile Infinity Dual has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Qmobile flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Qmobile_Infinity_Dual_MT6580_050117_6.0.zip File Size: 855 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Qmobile Infinity Dual should run like a brand new unit.
File Details
| File name | Qmobile Infinity Dual |
|---|---|
| Package | Qmobile_Infinity_Dual_MT6580_050117_6.0.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6580 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 855 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile Infinity Dual with SP Flash Tool
- Confirm Qmobile Infinity Dual matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (855 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Qmobile Infinity Dual free to download?
Yes, Qmobile Infinity Dual can be downloaded free of charge from this page.
How large is the download?
The Qmobile Infinity Dual package is 855 MB.
Which tool do I need to flash Qmobile Infinity Dual?
Qmobile Infinity Dual is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile Infinity Dual?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.