Nokia 3 TA-1038
Nokia 3 TA-1038 is a Nokia firmware file listed under Nokia, distributed as Nokia_3_TA-1038_MT6737M_NE1-5180-0-00WW-B03_ROM.zip with a download size of 1.46 GB. It is built for the MediaTek MT6737M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 3 TA-1038
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Nokia 3 TA-1038 owners, this page hosts the original Nokia stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Nokia 3 TA-1038 to factory condition. File Name: Nokia_3_TA-1038_MT6737M_NE1-5180-0-00WW-B03_ROM.zip File Size: 1.46 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Nokia 3 TA-1038 should run like a brand new unit.
File Details
| File name | Nokia 3 TA-1038 |
|---|---|
| Package | Nokia_3_TA-1038_MT6737M_NE1-5180-0-00WW-B03_ROM.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Chipset | MediaTek MT6737M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.46 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 3 TA-1038 with SP Flash Tool
- Confirm Nokia 3 TA-1038 matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.46 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Nokia 3 TA-1038 free to download?
Yes, Nokia 3 TA-1038 can be downloaded free of charge from this page.
How large is the download?
The Nokia 3 TA-1038 package is 1.46 GB.
Which tool do I need to flash Nokia 3 TA-1038?
Nokia 3 TA-1038 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.