Motorola Moto C XT1726
Motorola Moto C XT1726 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_C_XT1726_MT6737M_PANELL_26_DT_NRD90M.06.045_18072018.zip with a download size of 1 GB. It is built for the MediaTek MT6737M chipset, with a firmware build date of July 18, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Motorola Moto C XT1726
The Motorola Moto C XT1726 runs on Motorola's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Motorola Moto C XT1726 to factory condition. File Name: Motorola_Moto_C_XT1726_MT6737M_PANELL_26_DT_NRD90M.06.045_18072018.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Motorola Moto C XT1726 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Motorola Moto C XT1726 |
|---|---|
| Package | Motorola_Moto_C_XT1726_MT6737M_PANELL_26_DT_NRD90M.06.045_18072018.zip |
| Brand / Platform | Motorola |
| Category | Motorola |
| Chipset | MediaTek MT6737M |
| Build date | July 18, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Motorola Moto C XT1726 with SP Flash Tool
- Confirm Motorola Moto C XT1726 matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Motorola Moto C XT1726 free to download?
Yes, Motorola Moto C XT1726 can be downloaded free of charge from this page.
How large is the download?
The Motorola Moto C XT1726 package is 1 GB.
Which tool do I need to flash Motorola Moto C XT1726?
Motorola Moto C XT1726 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.