Lenovo Vibe S2
Lenovo Vibe S2 is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Vibe_S2_MT6580_250816_6.0.zip with a download size of 1012 MB. It is built for the MediaTek MT6580 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Vibe S2
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lenovo Vibe S2 owners, this page hosts the original Lenovo stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lenovo Vibe S2 a fresh start without the clutter that builds up over time. File Name: Lenovo_Vibe_S2_MT6580_250816_6.0.zip File Size: 1012 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Lenovo Vibe S2 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Lenovo Vibe S2 |
|---|---|
| Package | Lenovo_Vibe_S2_MT6580_250816_6.0.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6580 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1012 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Vibe S2 with SP Flash Tool
- Confirm Lenovo Vibe S2 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1012 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lenovo Vibe S2 free to download?
Yes, Lenovo Vibe S2 can be downloaded free of charge from this page.
How large is the download?
The Lenovo Vibe S2 package is 1012 MB.
Which tool do I need to flash Lenovo Vibe S2?
Lenovo Vibe S2 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lenovo Vibe S2?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.