Lenovo V3 Stock Firmware

About Lenovo V3 Stock Firmware

Here you will find all the latest Lenovo firmware for Lenovo V3. If you are looking for Lenovo V3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Lenovo V3, if it is not, then flashing the below stock firmware can brick your device. The Lenovo V3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Lenovo V3 Firmware File Name : Lenovo_V3_MT6580_S206_20151214.zip File Size : 496 MB Android OS Version : 4.4.2 Get Firmware Also: Lenovo V80 Stock Firmware How To Flash Lenovo V3 Stock Firmware Download and extract the Lenovo V3 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Lenovo V3 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Lenovo V3 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Lenovo V3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

How to flash Lenovo V3 Stock Firmware with SP Flash Tool

1. Confirm Lenovo V3 Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (496 MB) using the button above and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Guides for this firmware

• MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
• SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
• Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

Frequently asked questions

Is Lenovo V3 Stock Firmware free to download?

Yes, Lenovo V3 Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Lenovo V3 Stock Firmware package is 496 MB.

Which tool do I need to flash Lenovo V3 Stock Firmware?

Lenovo V3 Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.