Lenovo Tab 3 7 TB3-701i
Lenovo Tab 3 7 TB3-701i is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_3_7_TB3-701i_MT6580_S000031_1609021200_MP6V2_ROW_5.1.zip with a download size of 925 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab 3 7 TB3-701i
Looking for the official stock firmware for your Lenovo Tab 3 7 TB3-701i? You're in the right place. Below is the original Lenovo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lenovo Tab 3 7 TB3-701i a fresh start without the clutter that builds up over time. File Name: Lenovo_Tab_3_7_TB3-701i_MT6580_S000031_1609021200_MP6V2_ROW_5.1.zip File Size: 925 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Lenovo Tab 3 7 TB3-701i should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Lenovo Tab 3 7 TB3-701i |
|---|---|
| Package | Lenovo_Tab_3_7_TB3-701i_MT6580_S000031_1609021200_MP6V2_ROW_5.1.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 925 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab 3 7 TB3-701i with SP Flash Tool
- Confirm Lenovo Tab 3 7 TB3-701i matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (925 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lenovo Tab 3 7 TB3-701i free to download?
Yes, Lenovo Tab 3 7 TB3-701i can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab 3 7 TB3-701i package is 925 MB.
Which tool do I need to flash Lenovo Tab 3 7 TB3-701i?
Lenovo Tab 3 7 TB3-701i is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lenovo Tab 3 7 TB3-701i?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.