Itel S15 Pro L6002P
Itel S15 Pro L6002P is a Itel firmware file listed under Itel, distributed as Itel_S15_Pro_L6002P_V035_20190814_9.0_SPD.ZIP with a download size of 2 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie), with a firmware build date of August 14, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel S15 Pro L6002P
Looking for the official stock firmware for your Itel S15 Pro L6002P? You're in the right place. Below is the original Itel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Itel S15 Pro L6002P to factory condition. File Name: Itel_S15_Pro_L6002P_V035_20190814_9.0_SPD.ZIP File Size: 2 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Itel S15 Pro L6002P should run like a brand new unit.
File Details
| File name | Itel S15 Pro L6002P |
|---|---|
| Package | Itel_S15_Pro_L6002P_V035_20190814_9.0_SPD.ZIP |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Build date | August 14, 2019 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel S15 Pro L6002P with SPD ResearchDownload
- Confirm Itel S15 Pro L6002P matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel S15 Pro L6002P free to download?
Yes, Itel S15 Pro L6002P can be downloaded free of charge from this page.
How large is the download?
The Itel S15 Pro L6002P package is 2 GB.
Which tool do I need to flash Itel S15 Pro L6002P?
Itel S15 Pro L6002P is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel S15 Pro L6002P?
This firmware is Android 9 (Pie), built on August 14, 2019.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.