itel P48 Pro
itel P48 Pro is a itel firmware file listed under Itel, distributed as Itel_P48_Pro_MT6572_V0.1_281220_4.4.2.zip with a download size of 318 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About itel P48 Pro
Looking for the official stock firmware for your itel P48 Pro? You're in the right place. Below is the original itel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the itel P48 Pro to factory condition. File Name: Itel_P48_Pro_MT6572_V0.1_281220_4.4.2.zip File Size: 318 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the itel P48 Pro returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | itel P48 Pro |
|---|---|
| Package | Itel_P48_Pro_MT6572_V0.1_281220_4.4.2.zip |
| Brand / Platform | itel |
| Category | Itel |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 318 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash itel P48 Pro with SP Flash Tool
- Confirm itel P48 Pro matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (318 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is itel P48 Pro free to download?
Yes, itel P48 Pro can be downloaded free of charge from this page.
How large is the download?
The itel P48 Pro package is 318 MB.
Which tool do I need to flash itel P48 Pro?
itel P48 Pro is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is itel P48 Pro?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for itel devices. Always confirm it matches your specific model before flashing.