Itel P36 W6501
Itel P36 W6501 is a Itel firmware file listed under Itel, distributed as Itel_P36_W6501_V042_211224_9.0_SPD.zip with a download size of 1.90 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel P36 W6501
The Itel P36 W6501 runs on Itel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Itel P36 W6501 to factory condition. File Name: Itel_P36_W6501_V042_211224_9.0_SPD.zip File Size: 1.90 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Itel P36 W6501 should run like a brand new unit.
File Details
| File name | Itel P36 W6501 |
|---|---|
| Package | Itel_P36_W6501_V042_211224_9.0_SPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.90 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel P36 W6501 with SPD ResearchDownload
- Confirm Itel P36 W6501 matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.90 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel P36 W6501 free to download?
Yes, Itel P36 W6501 can be downloaded free of charge from this page.
How large is the download?
The Itel P36 W6501 package is 1.90 GB.
Which tool do I need to flash Itel P36 W6501?
Itel P36 W6501 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel P36 W6501?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.