Itel A56 LTE L6004
Itel A56 LTE L6004 is a Itel firmware file listed under Itel, distributed as Itel_A56_LTE_L6004_V007_20200711_9.0_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie), with a firmware build date of July 11, 2020. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel A56 LTE L6004
The Itel A56 LTE L6004 runs on Itel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Itel A56 LTE L6004 back to square one. File Name: Itel_A56_LTE_L6004_V007_20200711_9.0_SPD.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Itel A56 LTE L6004 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Itel A56 LTE L6004 |
|---|---|
| Package | Itel_A56_LTE_L6004_V007_20200711_9.0_SPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Build date | July 11, 2020 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel A56 LTE L6004 with SPD ResearchDownload
- Confirm Itel A56 LTE L6004 matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel A56 LTE L6004 free to download?
Yes, Itel A56 LTE L6004 can be downloaded free of charge from this page.
How large is the download?
The Itel A56 LTE L6004 package is 1 GB.
Which tool do I need to flash Itel A56 LTE L6004?
Itel A56 LTE L6004 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel A56 LTE L6004?
This firmware is Android 9 (Pie), built on July 11, 2020.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.