Itel A55 LTE L6003P
Itel A55 LTE L6003P is a Itel firmware file listed under Itel, distributed as Itel_A55_LTE_L6003P_V018_20190710_9.0_SPD.ZIP with a download size of 2 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie), with a firmware build date of July 10, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel A55 LTE L6003P
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Itel A55 LTE L6003P owners, this page hosts the original Itel stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Itel A55 LTE L6003P to factory condition. File Name: Itel_A55_LTE_L6003P_V018_20190710_9.0_SPD.ZIP File Size: 2 GB Back up your files, charge the Itel A55 LTE L6003P past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Itel A55 LTE L6003P should run like a brand new unit.
File Details
| File name | Itel A55 LTE L6003P |
|---|---|
| Package | Itel_A55_LTE_L6003P_V018_20190710_9.0_SPD.ZIP |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Build date | July 10, 2019 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel A55 LTE L6003P with SPD ResearchDownload
- Confirm Itel A55 LTE L6003P matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel A55 LTE L6003P free to download?
Yes, Itel A55 LTE L6003P can be downloaded free of charge from this page.
How large is the download?
The Itel A55 LTE L6003P package is 2 GB.
Which tool do I need to flash Itel A55 LTE L6003P?
Itel A55 LTE L6003P is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel A55 LTE L6003P?
This firmware is Android 9 (Pie), built on July 10, 2019.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.