Itel A47
Itel A47 is a Itel firmware file listed under Itel, distributed as Itel_A47_L5505_V004_20200518_9.0_SPD.zip with a download size of 1.42 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 9 (Pie), with a firmware build date of May 18, 2020. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Itel A47
Looking for the official stock firmware for your Itel A47? You're in the right place. Below is the original Itel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Itel_A47_L5505_V004_20200518_9.0_SPD.zip File Size: 1.42 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Itel A47 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Itel A47 |
|---|---|
| Package | Itel_A47_L5505_V004_20200518_9.0_SPD.zip |
| Brand / Platform | Itel |
| Category | Itel |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 9 (Pie) |
| Build date | May 18, 2020 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.42 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Itel A47 with SPD ResearchDownload
- Confirm Itel A47 matches your exact device model and that it is intended for Itel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.42 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Itel A47 free to download?
Yes, Itel A47 can be downloaded free of charge from this page.
How large is the download?
The Itel A47 package is 1.42 GB.
Which tool do I need to flash Itel A47?
Itel A47 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Itel A47?
This firmware is Android 9 (Pie), built on May 18, 2020.
Which devices is this firmware for?
This file is intended for Itel devices. Always confirm it matches your specific model before flashing.