Infinix Smart 6 Plus X6823C
Infinix Smart 6 Plus X6823C is a Infinix firmware file listed under Infinix, distributed as Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip with a download size of 2.00 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Smart 6 Plus X6823C
Looking for the official stock firmware for your Infinix Smart 6 Plus X6823C? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Smart 6 Plus X6823C back to square one. File Name: Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip File Size: 2.00 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Infinix Smart 6 Plus X6823C should run like a brand new unit.
File Details
| File name | Infinix Smart 6 Plus X6823C |
|---|---|
| Package | Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Smart 6 Plus X6823C with SP Flash Tool
- Confirm Infinix Smart 6 Plus X6823C matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.00 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Smart 6 Plus X6823C free to download?
Yes, Infinix Smart 6 Plus X6823C can be downloaded free of charge from this page.
How large is the download?
The Infinix Smart 6 Plus X6823C package is 2.00 GB.
Which tool do I need to flash Infinix Smart 6 Plus X6823C?
Infinix Smart 6 Plus X6823C is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.