# Infinix Smart 6 Plus X6823C

> Infinix Smart 6 Plus X6823C is an Infinix firmware file listed under Infinix, distributed as Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip with a download size of 2.00 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/infinix-smart-6-plus-x6823c-102055>

## File details

- **File name:** Infinix Smart 6 Plus X6823C
- **Package:** Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip
- **Brand / platform:** Infinix
- **Category:** [Infinix](https://www.filefirmware.com/category/infinix)
- **Chipset:** MediaTek MT6765
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 2.00 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/infinix-smart-6-plus-x6823c-102055>

## About Infinix Smart 6 Plus X6823C

Looking for the official stock firmware for your Infinix Smart 6 Plus X6823C? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Smart 6 Plus X6823C back to square one. File Name: Infinix_Smart_6_Plus_X6823C_MT6765_V484_220628.zip File Size: 2.00 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Infinix Smart 6 Plus X6823C should run like a brand new unit.

## How to flash Infinix Smart 6 Plus X6823C with SP Flash Tool

1. Confirm Infinix Smart 6 Plus X6823C matches your exact device model and that the phone uses the MT6765 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2.00 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6765 Firmware Guide: Tools and Flashing Instructions](https://www.filefirmware.com/blog/mt6765-firmware-guide-tools-and-flashing-instructions): The MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Infinix Smart 6 Plus X6823C free to download?

Yes, Infinix Smart 6 Plus X6823C can be downloaded free of charge from its web page.

### How large is the download?

The Infinix Smart 6 Plus X6823C package is 2.00 GB.

### Which tool do I need to flash Infinix Smart 6 Plus X6823C?

Infinix Smart 6 Plus X6823C is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

## More Infinix files

- [Infinix Zero X Neo X6810](https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140) — 4.40 GB
- [Infinix Zero X X6811B](https://www.filefirmware.com/file/infinix-zero-x-x6811b-102130) — 4.54 GB
- [Infinix Zero 5G X6815](https://www.filefirmware.com/file/infinix-zero-5g-x6815-102115) — 4.55 GB
- [Infinix X675](https://www.filefirmware.com/file/infinix-x675-102110) — 2.95 GB
- [Infinix Zero 5G X6815B](https://www.filefirmware.com/file/infinix-zero-5g-x6815b-102109) — 4.55 GB
- [Infinix Zero 5 X603](https://www.filefirmware.com/file/infinix-zero-5-x603-102106) — 2 GB
- [Infinix Zero 4 X555](https://www.filefirmware.com/file/infinix-zero-4-x555-102105) — 2 GB
- [Infinix X627W](https://www.filefirmware.com/file/infinix-x627w-102102) — 1.79 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/infinix-smart-6-plus-x6823c-102055>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
