Infinix Smart 5010
Infinix Smart 5010 is a Infinix firmware file listed under Infinix, distributed as Infinix_Smart_5010_MT6580_060517_7.0.zip with a download size of 1.00 GB. It is built for the MediaTek MT6580 chipset and runs Android 7.0 (Nougat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Smart 5010
The Infinix Smart 5010 runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Infinix Smart 5010 to factory condition. File Name: Infinix_Smart_5010_MT6580_060517_7.0.zip File Size: 1.00 GB Back up your files, charge the Infinix Smart 5010 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Infinix Smart 5010 should run like a brand new unit.
File Details
| File name | Infinix Smart 5010 |
|---|---|
| Package | Infinix_Smart_5010_MT6580_060517_7.0.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6580 |
| Android version | Android 7.0 (Nougat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Smart 5010 with SP Flash Tool
- Confirm Infinix Smart 5010 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.00 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Smart 5010 free to download?
Yes, Infinix Smart 5010 can be downloaded free of charge from this page.
How large is the download?
The Infinix Smart 5010 package is 1.00 GB.
Which tool do I need to flash Infinix Smart 5010?
Infinix Smart 5010 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Infinix Smart 5010?
This firmware is Android 7.0 (Nougat).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.