Infinix K1
Infinix K1 is a Infinix firmware file listed under Infinix, distributed as Infinix_K1_MT6580_20160614_5.1.zip with a download size of 486 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of June 14, 2016. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix K1
Infinix K1 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Infinix_K1_MT6580_20160614_5.1.zip File Size: 486 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Infinix K1 |
|---|---|
| Package | Infinix_K1_MT6580_20160614_5.1.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | June 14, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 486 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Infinix K1 with SP Flash Tool
- Confirm Infinix K1 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (486 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix K1 free to download?
Yes, Infinix K1 can be downloaded free of charge from this page.
How large is the download?
The Infinix K1 package is 486 MB.
Which tool do I need to flash Infinix K1?
Infinix K1 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Infinix K1?
This firmware is Android 5.1 (Lollipop), built on June 14, 2016.
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.