Infinix

Infinix HOT 6 x606b

nfinix_Hot_6_X606B_MT6580_H8023ABD_V211_180620.zip
June 16, 2026 Infinix 1 GB Infinix

Infinix HOT 6 x606b is a Infinix firmware file listed under Infinix, distributed as nfinix_Hot_6_X606B_MT6580_H8023ABD_V211_180620.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 36 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Infinix HOT 6 x606b

Looking for the official stock firmware for your Infinix HOT 6 x606b? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Infinix HOT 6 x606b a fresh start without the clutter that builds up over time. File Name: nfinix_Hot_6_X606B_MT6580_H8023ABD_V211_180620.zip File Size: 1 GB Back up your files, charge the Infinix HOT 6 x606b past 50 percent, install the matching drivers, and only then begin. When it finishes, the Infinix HOT 6 x606b restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameInfinix HOT 6 x606b
Packagenfinix_Hot_6_X606B_MT6580_H8023ABD_V211_180620.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6580
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix HOT 6 x606b with SP Flash Tool

  1. Confirm Infinix HOT 6 x606b matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix HOT 6 x606b free to download?

Yes, Infinix HOT 6 x606b can be downloaded free of charge from this page.

How large is the download?

The Infinix HOT 6 x606b package is 1 GB.

Which tool do I need to flash Infinix HOT 6 x606b?

Infinix HOT 6 x606b is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix