Infinix Hot 5 X559F
Infinix Hot 5 X559F is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_5_X559F_MT6580_V21_180711.zip with a download size of 2.00 GB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Hot 5 X559F
Looking for the official stock firmware for your Infinix Hot 5 X559F? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Hot 5 X559F back to square one. File Name: Infinix_Hot_5_X559F_MT6580_V21_180711.zip File Size: 2.00 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Infinix Hot 5 X559F should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Infinix Hot 5 X559F |
|---|---|
| Package | Infinix_Hot_5_X559F_MT6580_V21_180711.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6580 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Hot 5 X559F with SP Flash Tool
- Confirm Infinix Hot 5 X559F matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.00 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Hot 5 X559F free to download?
Yes, Infinix Hot 5 X559F can be downloaded free of charge from this page.
How large is the download?
The Infinix Hot 5 X559F package is 2.00 GB.
Which tool do I need to flash Infinix Hot 5 X559F?
Infinix Hot 5 X559F is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.