Infinix

Infinix Hot 4 Pro X5511B

Infinix_Hot_4_Pro_X5511B_MT6737M_H3716B_V140_170930.zip
June 16, 2026 Infinix 1.50 GB Infinix

Infinix Hot 4 Pro X5511B is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_4_Pro_X5511B_MT6737M_H3716B_V140_170930.zip with a download size of 1.50 GB. It is built for the MediaTek MT6737M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.50 GB
Download Free

About Infinix Hot 4 Pro X5511B

The Infinix Hot 4 Pro X5511B runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Infinix Hot 4 Pro X5511B to factory condition. File Name: Infinix_Hot_4_Pro_X5511B_MT6737M_H3716B_V140_170930.zip File Size: 1.50 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Infinix Hot 4 Pro X5511B should run like a brand new unit.

File Details

File nameInfinix Hot 4 Pro X5511B
PackageInfinix_Hot_4_Pro_X5511B_MT6737M_H3716B_V140_170930.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6737M
Flash toolSP Flash Tool
Package formatZIP archive
File size1.50 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Hot 4 Pro X5511B with SP Flash Tool

  1. Confirm Infinix Hot 4 Pro X5511B matches your exact device model and that the phone uses the MT6737M chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.50 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Hot 4 Pro X5511B free to download?

Yes, Infinix Hot 4 Pro X5511B can be downloaded free of charge from this page.

How large is the download?

The Infinix Hot 4 Pro X5511B package is 1.50 GB.

Which tool do I need to flash Infinix Hot 4 Pro X5511B?

Infinix Hot 4 Pro X5511B is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix