Infinix

Infinix Hot 10i PR652C

Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip
June 16, 2026 Infinix 2.03 GB Infinix

Infinix Hot 10i PR652C is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip with a download size of 2.03 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2.03 GB
Download Free

About Infinix Hot 10i PR652C

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Infinix Hot 10i PR652C owners, this page hosts the original Infinix stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip File Size: 2.03 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Infinix Hot 10i PR652C should run like a brand new unit.

File Details

File nameInfinix Hot 10i PR652C
PackageInfinix_Hot_10i_PR652C_V017_210805_11_SPD.zip
Brand / PlatformInfinix
CategoryInfinix
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size2.03 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Hot 10i PR652C with SPD ResearchDownload

  1. Confirm Infinix Hot 10i PR652C matches your exact device model and that it is intended for Infinix hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2.03 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Infinix Hot 10i PR652C free to download?

Yes, Infinix Hot 10i PR652C can be downloaded free of charge from this page.

How large is the download?

The Infinix Hot 10i PR652C package is 2.03 GB.

Which tool do I need to flash Infinix Hot 10i PR652C?

Infinix Hot 10i PR652C is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix