# Infinix Hot 10i PR652C

> Infinix Hot 10i PR652C is an Infinix firmware file listed under Infinix, distributed as Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip with a download size of 2.03 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/infinix-hot-10i-pr652c-101920>

## File details

- **File name:** Infinix Hot 10i PR652C
- **Package:** Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip
- **Brand / platform:** Infinix
- **Category:** [Infinix](https://www.filefirmware.com/category/infinix)
- **Platform:** Unisoc (Spreadtrum)
- **Flash tool:** SPD ResearchDownload (or UpgradeDownload)
- **Package format:** ZIP archive
- **File size:** 2.03 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/infinix-hot-10i-pr652c-101920>

## About Infinix Hot 10i PR652C

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Infinix Hot 10i PR652C owners, this page hosts the original Infinix stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Hot_10i_PR652C_V017_210805_11_SPD.zip File Size: 2.03 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Infinix Hot 10i PR652C should run like a brand new unit.

## How to flash Infinix Hot 10i PR652C with SPD ResearchDownload

1. Confirm Infinix Hot 10i PR652C matches your exact device model and that it is intended for Infinix hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2.03 GB) from the web page and extract it on a Windows PC.
4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
5. In the tool, load the .pac firmware file from the extracted folder.
6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

## Guides for this firmware

- [Connecting Unisoc Phones to SPD ResearchDownload](https://www.filefirmware.com/blog/connecting-unisoc-phones-to-spd-researchdownload): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- [Flashing .pac Files with SPD ResearchDownload Guide](https://www.filefirmware.com/blog/flashing-pac-files-with-spd-researchdownload-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- [How to Use SPD ResearchDownload: Firmware Flashing Guide](https://www.filefirmware.com/blog/how-to-use-spd-researchdownload-firmware-flashing-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…

## Frequently asked questions

### Is Infinix Hot 10i PR652C free to download?

Yes, Infinix Hot 10i PR652C can be downloaded free of charge from its web page.

### How large is the download?

The Infinix Hot 10i PR652C package is 2.03 GB.

### Which tool do I need to flash Infinix Hot 10i PR652C?

Infinix Hot 10i PR652C is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

### Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

## More Infinix files

- [Infinix Zero X Neo X6810](https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140) — 4.40 GB
- [Infinix Zero X X6811B](https://www.filefirmware.com/file/infinix-zero-x-x6811b-102130) — 4.54 GB
- [Infinix Zero 5G X6815](https://www.filefirmware.com/file/infinix-zero-5g-x6815-102115) — 4.55 GB
- [Infinix X675](https://www.filefirmware.com/file/infinix-x675-102110) — 2.95 GB
- [Infinix Zero 5G X6815B](https://www.filefirmware.com/file/infinix-zero-5g-x6815b-102109) — 4.55 GB
- [Infinix Zero 5 X603](https://www.filefirmware.com/file/infinix-zero-5-x603-102106) — 2 GB
- [Infinix Zero 4 X555](https://www.filefirmware.com/file/infinix-zero-4-x555-102105) — 2 GB
- [Infinix X627W](https://www.filefirmware.com/file/infinix-x627w-102102) — 1.79 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/infinix-hot-10i-pr652c-101920>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
