Huawei

Huawei Y625 Y625-U32

Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip
June 16, 2026 Huawei 750 MB Huawei

Huawei Y625 Y625-U32 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip with a download size of 750 MB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
750 MB
Download Free

About Huawei Y625 Y625-U32

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Y625 Y625-U32 owners, this page hosts the original Huawei stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Y625 Y625-U32 a fresh start without the clutter that builds up over time. File Name: Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip File Size: 750 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Huawei Y625 Y625-U32 should run like a brand new unit.

File Details

File nameHuawei Y625 Y625-U32
PackageHuawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip
Brand / PlatformHuawei
CategoryHuawei
PlatformQualcomm
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size750 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Y625 Y625-U32 with QFIL

  1. Confirm Huawei Y625 Y625-U32 matches your exact device model and that it is intended for Huawei hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (750 MB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Huawei Y625 Y625-U32 free to download?

Yes, Huawei Y625 Y625-U32 can be downloaded free of charge from this page.

How large is the download?

The Huawei Y625 Y625-U32 package is 750 MB.

Which tool do I need to flash Huawei Y625 Y625-U32?

Huawei Y625 Y625-U32 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei