# Huawei Y625 Y625-U32

> Huawei Y625 Y625-U32 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip with a download size of 750 MB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-y625-y625-u32-100896>

## File details

- **File name:** Huawei Y625 Y625-U32
- **Package:** Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Platform:** Qualcomm
- **Flash tool:** QFIL (part of Qualcomm QPST)
- **Package format:** ZIP archive
- **File size:** 750 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-y625-y625-u32-100896>

## About Huawei Y625 Y625-U32

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Y625 Y625-U32 owners, this page hosts the original Huawei stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Y625 Y625-U32 a fresh start without the clutter that builds up over time. File Name: Huawei_Y625_Y625-U32_V100R001C328B108_Firmware_General_05021VAU_QFIL.zip File Size: 750 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Huawei Y625 Y625-U32 should run like a brand new unit.

## How to flash Huawei Y625 Y625-U32 with QFIL

1. Confirm Huawei Y625 Y625-U32 matches your exact device model and that it is intended for Huawei hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (750 MB) from the web page and extract it on a Windows PC.
4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

## Guides for this firmware

- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [How to Get Qualcomm Phones into EDL Mode for QFIL](https://www.filefirmware.com/blog/how-to-get-qualcomm-phones-into-edl-mode-for-qfil): To get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- [How to Fix QFIL Sahara Fail Error](https://www.filefirmware.com/blog/how-to-fix-qfil-sahara-fail-error): The Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…

## Frequently asked questions

### Is Huawei Y625 Y625-U32 free to download?

Yes, Huawei Y625 Y625-U32 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Y625 Y625-U32 package is 750 MB.

### Which tool do I need to flash Huawei Y625 Y625-U32?

Huawei Y625 Y625-U32 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-y625-y625-u32-100896>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
