Huawei Y3 CAG-L02
Huawei Y3 CAG-L02 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y3_2018_CAG-L02_CairoGO-L22-B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip with a download size of 1 GB. It is built for the MediaTek MT6737M chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y3 CAG-L02
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Y3 CAG-L02 owners, this page hosts the original Huawei stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Y3 CAG-L02 back to square one. File Name: Huawei_Y3_2018_CAG-L02_CairoGO-L22-B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Huawei Y3 CAG-L02 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Huawei Y3 CAG-L02 |
|---|---|
| Package | Huawei_Y3_2018_CAG-L02_CairoGO-L22-B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6737M |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y3 CAG-L02 with SP Flash Tool
- Confirm Huawei Y3 CAG-L02 matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Y3 CAG-L02 free to download?
Yes, Huawei Y3 CAG-L02 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y3 CAG-L02 package is 1 GB.
Which tool do I need to flash Huawei Y3 CAG-L02?
Huawei Y3 CAG-L02 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Huawei Y3 CAG-L02?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.