Huawei R10 Clone
Huawei R10 Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_R10_Clone_MT6580_130717_6.0.zip with a download size of 455 MB. It is built for the MediaTek MT6580 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei R10 Clone
If your Huawei R10 Clone has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei R10 Clone to factory condition. File Name: Huawei_R10_Clone_MT6580_130717_6.0.zip File Size: 455 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Huawei R10 Clone restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Huawei R10 Clone |
|---|---|
| Package | Huawei_R10_Clone_MT6580_130717_6.0.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6580 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 455 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei R10 Clone with SP Flash Tool
- Confirm Huawei R10 Clone matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (455 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei R10 Clone free to download?
Yes, Huawei R10 Clone can be downloaded free of charge from this page.
How large is the download?
The Huawei R10 Clone package is 455 MB.
Which tool do I need to flash Huawei R10 Clone?
Huawei R10 Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Huawei R10 Clone?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.