Huawei

Huawei P40 Pro Clone

Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip
June 16, 2026 Huawei 220 MB Huawei

Huawei P40 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip with a download size of 220 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
220 MB
Download Free

About Huawei P40 Pro Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei P40 Pro Clone owners, this page hosts the original Huawei stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei P40 Pro Clone a fresh start without the clutter that builds up over time. File Name: Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip File Size: 220 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Huawei P40 Pro Clone should run like a brand new unit.

File Details

File nameHuawei P40 Pro Clone
PackageHuawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6572
Android versionAndroid 4.4 (KitKat)
Flash toolSP Flash Tool
Package formatZIP archive
File size220 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei P40 Pro Clone with SP Flash Tool

  1. Confirm Huawei P40 Pro Clone matches your exact device model and that the phone uses the MT6572 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (220 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei P40 Pro Clone free to download?

Yes, Huawei P40 Pro Clone can be downloaded free of charge from this page.

How large is the download?

The Huawei P40 Pro Clone package is 220 MB.

Which tool do I need to flash Huawei P40 Pro Clone?

Huawei P40 Pro Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei P40 Pro Clone?

This firmware is Android 4.4 (KitKat).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei