# Huawei P40 Pro Clone

> Huawei P40 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip with a download size of 220 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-p40-pro-clone-100715>

## File details

- **File name:** Huawei P40 Pro Clone
- **Package:** Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6572
- **Android version:** Android 4.4 (KitKat)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 220 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-p40-pro-clone-100715>

## About Huawei P40 Pro Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei P40 Pro Clone owners, this page hosts the original Huawei stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei P40 Pro Clone a fresh start without the clutter that builds up over time. File Name: Huawei_Clone_P40_Pro_MT6572_160819_4.4.2.zip File Size: 220 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Huawei P40 Pro Clone should run like a brand new unit.

## How to flash Huawei P40 Pro Clone with SP Flash Tool

1. Confirm Huawei P40 Pro Clone matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (220 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei P40 Pro Clone free to download?

Yes, Huawei P40 Pro Clone can be downloaded free of charge from its web page.

### How large is the download?

The Huawei P40 Pro Clone package is 220 MB.

### Which tool do I need to flash Huawei P40 Pro Clone?

Huawei P40 Pro Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei P40 Pro Clone?

This firmware is Android 4.4 (KitKat).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-p40-pro-clone-100715>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
