Huawei

Huawei O6 Plus Clone

Huawei_O6_Plus_Clone_MT6580_V04_040317_5.1.zip
June 16, 2026 Huawei 708 MB Huawei

Huawei O6 Plus Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_O6_Plus_Clone_MT6580_V04_040317_5.1.zip with a download size of 708 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
708 MB
Download Free

About Huawei O6 Plus Clone

Looking for the official stock firmware for your Huawei O6 Plus Clone? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei O6 Plus Clone back to square one. File Name: Huawei_O6_Plus_Clone_MT6580_V04_040317_5.1.zip File Size: 708 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Huawei O6 Plus Clone should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei O6 Plus Clone
PackageHuawei_O6_Plus_Clone_MT6580_V04_040317_5.1.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6580
Android versionAndroid 5.1 (Lollipop)
Flash toolSP Flash Tool
Package formatZIP archive
File size708 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei O6 Plus Clone with SP Flash Tool

  1. Confirm Huawei O6 Plus Clone matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (708 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei O6 Plus Clone free to download?

Yes, Huawei O6 Plus Clone can be downloaded free of charge from this page.

How large is the download?

The Huawei O6 Plus Clone package is 708 MB.

Which tool do I need to flash Huawei O6 Plus Clone?

Huawei O6 Plus Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei O6 Plus Clone?

This firmware is Android 5.1 (Lollipop).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei