Huawei Mate 20X Clone
Huawei Mate 20X Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Mate_20X_Clone_MT6580_20181030.zip with a download size of 705 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 30, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Mate 20X Clone
Looking for the official stock firmware for your Huawei Mate 20X Clone? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Mate 20X Clone back to square one. File Name: Huawei_Mate_20X_Clone_MT6580_20181030.zip File Size: 705 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Huawei Mate 20X Clone returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Huawei Mate 20X Clone |
|---|---|
| Package | Huawei_Mate_20X_Clone_MT6580_20181030.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6580 |
| Build date | October 30, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 705 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Mate 20X Clone with SP Flash Tool
- Confirm Huawei Mate 20X Clone matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (705 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Mate 20X Clone free to download?
Yes, Huawei Mate 20X Clone can be downloaded free of charge from this page.
How large is the download?
The Huawei Mate 20X Clone package is 705 MB.
Which tool do I need to flash Huawei Mate 20X Clone?
Huawei Mate 20X Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.