Huawei

Huawei Honor H30-T10

Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip
June 16, 2026 Huawei 419 MB Huawei

Huawei Honor H30-T10 is a Huawei firmware file listed under Huawei, distributed as Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip with a download size of 419 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2 (Jelly Bean), with a firmware build date of December 16, 2013. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
419 MB
Download Free

About Huawei Honor H30-T10

If your Huawei Honor H30-T10 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip File Size: 419 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Huawei Honor H30-T10 should run like a brand new unit.

File Details

File nameHuawei Honor H30-T10
PackageHuawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6572
Android versionAndroid 4.2 (Jelly Bean)
Build dateDecember 16, 2013
Flash toolSP Flash Tool
Package formatZIP archive
File size419 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Honor H30-T10 with SP Flash Tool

  1. Confirm Huawei Honor H30-T10 matches your exact device model and that the phone uses the MT6572 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (419 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Honor H30-T10 free to download?

Yes, Huawei Honor H30-T10 can be downloaded free of charge from this page.

How large is the download?

The Huawei Honor H30-T10 package is 419 MB.

Which tool do I need to flash Huawei Honor H30-T10?

Huawei Honor H30-T10 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei Honor H30-T10?

This firmware is Android 4.2 (Jelly Bean), built on December 16, 2013.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei