# Huawei Honor H30-T10

> Huawei Honor H30-T10 is a Huawei firmware file listed under Huawei, distributed as Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip with a download size of 419 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2, with a firmware build date of December 16, 2013. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-honor-h30-t10-99831>

## File details

- **File name:** Huawei Honor H30-T10
- **Package:** Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6572
- **Android version:** Android 4.2 (Jelly Bean)
- **Build date:** December 16, 2013
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 419 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-honor-h30-t10-99831>

## About Huawei Honor H30-T10

If your Huawei Honor H30-T10 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Honor_H30-T10_MT6572_20131216_4.2.2.zip File Size: 419 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Huawei Honor H30-T10 should run like a brand new unit.

## How to flash Huawei Honor H30-T10 with SP Flash Tool

1. Confirm Huawei Honor H30-T10 matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (419 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei Honor H30-T10 free to download?

Yes, Huawei Honor H30-T10 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Honor H30-T10 package is 419 MB.

### Which tool do I need to flash Huawei Honor H30-T10?

Huawei Honor H30-T10 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei Honor H30-T10?

This firmware is Android 4.2 (Jelly Bean), built on December 16, 2013.

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-honor-h30-t10-99831>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
